NORTHROP GRUMMAN Sperry Marine NAVIGAT X MK 2, Assembly Instructions Manual

Page: 25 / 112

NAVIGAT X Mk 2 056341 Rev. AA
2: Operation Page 2-13
2.10.2.5 Settings NAVIPRINT
Sets the parameters for the printout of an act. heading graph using the nav.
data printer NAVIPRINT.
Naviprint
Function: Switches printing on/off.
Settings: ON
output to printer active
OFF
no output to printer
Pap. Speed
Function: Sets the paper feed speed for the heading graph.
Settings: 60 mm
print at 60 mm/h (1 cm = 10 min.)
150 mm
print at 150 mm/h (1 cm = 4 min.)
600 mm
print at 600 mm/h (1 cm = 1 min.)
Hdg
Function: Sets the horizontal scaling of the heading graph.
Settings: ±30°
scale to show 30° to the left and to the right from the graph’s center
(current print position shifts to center when graph margin is
reached)
±180°
scale to show 180° to the left and to the right from the graph’s
center (current print position shifts to center when graph margin is
reached)
Note
After any interruption of power, the compass system‘s internal clock must be
reset in the user setup in order for date and time to appear correctly on the
printout.