Nortel RLC, Installation And Administration Manual

Page: 438 / 466

412 RLC Installation and Administration Guide
Glossary Standard 4.0
Single Connector Architecture
A method for supplying power and data lines in one connector on hard disks.
Provides hot-swap capability.
single-user ports
A RLC port that supports one remote station.
Small Computer System Interface
A standard for connecting and controlling mass storage devices such as
CD-ROMS, tape drives, and hard disks.
SNMP
Refer to Simple Network Management Protocol.
SPID
Refer to Service Profile Identifier .
SPRE code
A Special Prefix code that is used to initiate use of a host PBX feature. In a
Remote Gateway 9100 Series context, SPRE codes are used to
„
toggle a remote site between online and offline modes
„
use the paging feature
„
switch an analog or ATA equipped station from host-controlled mode to
locally controlled mode so that local calls can be made
„
register a Remote Gateway 9150 unit for a multiuser or dynamic port
SPX
Refer to Sequenced Packet Exchange.
SRAM
Static Random Access Memory. A form of RAM that retains its data without the
constant refreshing that DRAM requires.
station
A telephone or fax machine located at a remote site.