Nortel RLC, Installation And Administration Manual

Page: 131 / 466

RLC Installation and Administration Guide 105
June 2005 Installing the RLC
If you are using the RLC Multi-I/O cable–Enhanced, check the following points,
in addition to the items listed above:
„
Confirm that the 25-pair connector of Plug 5 and the 25-pair connector of a
cable leading to your cross-connect are properly and securely joined.
„
Confirm that the 25-pair connector at the other end of the cable mentioned
in the previous step is properly and securely joined to the 25-pair socket of
the cross-connect.
„
Confirm that the cable leading from the RLC to the cross-connect is in good
condition, end-to-end.
Ethernet connection
Check the following points in your Ethernet connection:
„
Confirm that the DB15–RJ45 adapter at Plug 2 of the RLC Multi-I/O
cable–Enhanced is properly and securely joined to Plug 2.
„
Confirm that the RJ45 plug of a CAT5 data cable leading to your Ethernet
hub is properly and securely seated in the RJ45 socket of the DB15–RJ45
adapter mentioned in the previous step.
„
Confirm that the other end of the CAT5 data cable mentioned in the
previous step is properly and securely seated in the appropriate Ethernet
hub socket.
„
Confirm that the CAT5 data cable leading to your Ethernet network’s data
router is properly and securely seated in the appropriate Ethernet hub
socket.
„
Confirm that the CAT5 data cable leading from your Ethernet hub is
properly and securely seated in the appropriate socket of the data router
mentioned in the previous step.