Nortel RLC, Installation And Administration Manual

Page: 189 / 466

RLC Installation and Administration Guide 163
June 2005 Using Configuration Manager
Closing Configuration Manager
When you have completed all of the configuration modifications you want to
make, or are done viewing unit logs and statistics, log off and close the
Configuration Manager application. This secures the configuration, preventing
others from accessing it if you walk away from the administration PC while
logged on to a unit.
To close Configuration Manager:
1 Ensure that you have saved all configuration changes by doing one or more
of the following:
„
From the Menu Bar, choose File
→
Save As, then specify the name for
the configuration file. The file is saved on the administration PC hard
disk.
„
Update the Flash memory of the unit you are connected to by doing one
of the following:
— Click on the Send button on any property sheet, then choose
Upload/Download
→
Save to Flash from the Menu Bar.
— Click on the Send All button on any property sheet, then choose
Upload/Download
→
Save to Flash from the Menu Bar.
— If you have saved the changes to a file, choose
Upload/Download
→
Upload Configuration from the Menu Bar.
For instructions, refer to “Restoring the configuration” on page
243.
2 Log off by choosing Connect
→
Logoff Unit from the Menu Bar.
3 Choose File
→
Exit from the Menu Bar.
Result: Configuration Manager closes.
.
CAUTION
Risk of configuration loss
If you close Configuration Manager without saving the changes
you made to a file on your PC, or without updating the Flash
memory of the unit you were working on, all changes are lost. You
must reenter any changes you made.