Nortel Meridian Meridian 1, Planning, Installation And Operating Instructions

Page: 151 / 556

Page 132 of 536 Chapter 15 – Installing and connecting SDI and Ethernet ports
553-3121-210 Standard 3.0 January 1999
4 Save changes by returning to the
General setup screen, moving
the cursor to the Saved field, and pressing Enter.
—————————— End of Procedure ——————————
Table 14
HP700/32 setup values
Global set-up screen
Host Port
1 Keyboard U.S.
Background Dark Message Translations English
Screen Saver 10 Min Setup Translations English
Refresh Rate 72 Hz Clear Display
Key Click Yes Clear Comm
User Set-up Screen
Smooth Scroll
Jump scroll Display Width 80
Cursor Type Blink Line Display Width Allowed 80 or 132
Cursor Off Char Cell Height 16
2nd Message Line On Clr on Width Change Yes
Message Line On Aux Mode Off
Status Line On Aux to Host Off
On Line Yes Print Terminator=FF No
Local Echo Off Logical Page Size 24
Auto Wrap Off Number of Pages 1
Auto Linefeed Off
Display Ctrl Codes Off
Emulation Set-up
Emulation
VT320 Cursor Keys Normal
Terminal Id VT220 Print Scroll Region Off
Control Codes 7-bit User Features Locked No
Characters Mode 8-bit User Keys Locked No
Preferred Char Set DEC Supplemental Data Procession Keys No
Key Pad Mode Application
Port 1 Set-up
Communications
Full Duplex Limited Transmit Off
Data Length 8-bits DSRI No
Parity None CTS Ignore
Stop Bits 1 CD Ignore
Xmit Baud 2400 Break Disconnect 170ms
RecvBaud =Xmit Disconnect Delay Never
Xmit pace Xoff Aux printer Type National
Recv Pace Xoff at 128
Port 2 Set-up
Communications
Full Duplex Xmit pace Xon/Xoff
Data Length 8-bits Recv Pace Xoff at 128
Parity None Limited Transmit Off
Stop Bits 1 Break Duration 170ms
Xmit Baud 9600 Aux Printer Type National
RecvBaud =Xmit
Keyboard Set-up
Lock Key
Caps Lock Warning Bell Yes
Kbd Lock Enable Yes Auto Answerback Yes
Save Tabs Yes Answerback =
Auto Repeat Yes Conceal Answerback No
Margin Bell Yes Do not set any tabs or programmed keys.