Nortel 2500 Seriess System Configuration Manual Download Page 56

Page: 56 / 392

Nortel Ethernet Routing Switch 2500 Series stacking

CFG mirror image process

The CFG mirror image process is triggered by specific events.

Power Cycle

After a power cycle, all the CFG images in a stack are

mirrored.

Figure 15 "CFG mirror process in stack" (page 56)

illustrates the CFG mirror

images in a three-unit stack after the stack is powered on. Unit 1 is the
Based Unit (BU) and all other units are Non-Based Units (NBU).

•

Unit 1 (BU) contains mirror images for unit 2 (CFG 2) and unit 3 (CFG 3).

•

Unit 2 (NBU), is the TEMP-BU. It contains a mirror image of unit 1 (CFG
1), in case the BU (unit 1) is removed from the stack.

•

All three mirror images (CFG 1, CFG 2, and CFG 3) are active.

•

Unit 2 is the Associated Unit of the CFG 2 mirror image.

•

The Mac Address 2 is the Associated Mac Address (AMA) of the CFG
2 mirror image.

Figure 15
CFG mirror process in stack

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B)

02.02

Standard

4.1

19 November 2007

Summary of Contents for 2500 Seriess






































































































































































































































































































































































































Search results

Summary of Contents for 2500 Seriess

Reviews:

Related manuals for 2500 Seriess

Brands by name

Popular brands

Nortel 2500 Seriess, System Configuration Manual

Search results

Summary of Contents for 2500 Seriess

Reviews:

Related manuals for 2500 Seriess

Brands by name

Popular brands