Nortel 2500 Seriess System Configuration Manual Download Page 323

Page: 323 / 392

Modifying system settings

323

ATTENTION

The configurable parameters on the System page are displayed in a read only
format on the System Information home page.

To configure system settings, use the following procedure:

Step

Action

From the main menu, choose Configuration > System.

The System page appears.

Figure 119
System page

Table 143 "System page items" (page 323)

describes the items on

the System page.

Table 143
System page items

Item

Range

Description

System
Description

The factory set description of the hardware and software
versions.

System Object ID

The character string that the vendor created to uniquely identify
this device.

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B)

02.02

Standard

4.1

19 November 2007

Summary of Contents for 2500 Seriess






































































































































































































































































































































































































Search results

Summary of Contents for 2500 Seriess

Reviews:

Related manuals for 2500 Seriess

Brands by name

Popular brands

Nortel 2500 Seriess, System Configuration Manual

Search results

Summary of Contents for 2500 Seriess

Reviews:

Related manuals for 2500 Seriess

Brands by name

Popular brands