Enabling Autopology
215
show clock time-zone
The
show clock time-zone
command is executed in the Global
Configuration command mode.
The
show clock time-zone
command has no parameters or variables.
Figure 74 "show clock time-zone output" (page 215)
displays sample output
from the show clock time-zone command.
Figure 74
show clock time-zone output
show clock summer-time
The
show clock summer-time
command displays the daylight savings
time settings. The syntax for the
show clock summer-time
command is:
show clock summer-time
The
show clock summer-time
command is executed in the Global
Configuration command mode.
The
show clock summer-time
command has no parameters or
variables.
Figure 75 "show clock summer-time" (page 215)
displays sample output
from the show clock summer-time command.
Figure 75
show clock summer-time
Enabling Autopology
You can enable the Optivity* Autopology* protocol using the CLI. See
www.nortel.com/support
for information on Autopology. (The product family
for Optivity and Autotopology is Data and Internet.) This section covers the
following commands:
•
"autotopology command" (page 216)
•
"no autotopology command" (page 216)
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B)
02.02
Standard
4.1
19 November 2007
Copyright © 2007, Nortel Networks
.
