Editing the chassis configuration
261
Field
Description
BootMode
This setting determines how the management interface
of the switch can be assigned an IP address, the next
time the switch boots. The four BootMode options are:
•
bootpDisabled - use the IP address contained in the
configuration file.
•
bootpAlways - always attempt to get an IP address
from the network.
•
bootpOrDefaultIP - attempt to get an IP address
from the network only when one is not contained
in the configuration file.
•
bootpOrLastAddress - attempt to get an IP address
from the network and if that fails use the IP address
that was in use on this switch before the last reboot.
ImageLoadMode
The source from which the agent image is loaded at
the next boot.
CurrentImageVersion
The version number of the agent image that is currently
used on the switch.
LocalStorageImage
Version
The version number of the agent image that is stored in
flash memory on the switch.
NextBootDefault
Gateway
The IP address of the default gateway for the agent to
use after the next time the switch is booted.
CurrentDefault
Gateway
The IP address of the default gateway that is currently
in use.
NextBootLoad
Protocol
The transport protocol to be used by the agent to load
the configuration information and the image at the next
boot.
LastLoadProtocol
The transport protocol last used to load the image and
configuration information on the switch.
Base Unit Info tab
The Base Unit Info tab provides read-only information about the operating
status of the hardware and whether or not the default factory settings are
being used.
To open the Base Unit Info tab, use the following procedure:
Step
Action
1
Select the chassis.
2
From the shortcut menu, choose Edit > Chassis.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B)
02.02
Standard
4.1
19 November 2007
Copyright © 2007, Nortel Networks
.
