Nortek Linear PERS-4200, Installation Instructions Manual

Page: 39 / 44

37
Mode Table Notes:
• [1] Setting the Console in Away Mode clears all supervisory events for
emergency sensors only. Supervisory timers for Smoke detectors, CO
detectors, and activity monitor sensors are not affected; switching to Home
or Away Mode constitutes activity.
• [2] Supervisory events are reported by automatic status reports regardless
of the global REPORT SUPERVISORY EVENTS setting. Also, AC power
loss events are reported by automatic status reports regardless of the global
REPORT AC FAIL setting. Both settings are on the Reporting Options tab.
• [3] If ENABLE HOME MODE ONLY is selected for TEMPERATURE LIMIT
SETTIN G S on the Console tab, temperature alarms will not occur in this
mode. Select ENABLE to allow temperature alarms in this mode.
• [4] Either ENABLE or ENABLE HOME MODE ONLY needs to be selected
on the Console tab for TEMPERATURE LIMIT SETTIN G S to allow
temperature alarms.
• [5] Console supervisory faults are always reported, but not annunciated in
Away Mode and Night Mode.
• [6] To start a two-way audio session after a report is triggered by an
emergency alarm sensor, two-way audio must be globally enabled in
TWO-WAY AUDIO MODE on the Reporting Options tab and enabled for the
sensor’s zone with the TWO-WAY AUDIO check box on the Sensors tab.
• [7] For activity sensors, two-way audio is enabled globally in TWO-WAY
AUDIO MODE on the Reporting Options tab regardless of the activity
sensor’s zone setting with the TWO-WAY AUDIO check box on the Sensors
tab.
• [8] To enable Console/sensor zone low battery and sensor zone
supervision annunciations, ANNUNCIATE TROUBLE INDICATION must
be selected on the Console tab.
• [9] To announce telephone line and AC power status, ANNUNCIATE
PHONE-LINE/AC STATUS must be selected on the Console tab.
• [10] The Console will only announce Home Mode when manually switched
from Away Mode using the HOME button.
• [11] To report missed reminder messages, the global REPORT MISSED
REMINDER option must be selected on the Reminder Messages tab and
the reminder message slot must have the SEND REPORT option selected.
18. Appendix B - Mode Table
CONSOLE OPERATIN G MODE
HOME MODE
AWAY MODE
(Overrides Night Mode)
NI G HT MODE
Repor
ts to Central Station
V
oice Announcement
Star
ts T
w
o-wa
y
A
udio
Repor
ts to Central Station
V
oice Announcement
Star
ts T
w
o-wa
y
A
udio
Repor
ts to Central Station
V
oice Announcement
Star
ts T
w
o-wa
y
A
udio
SYSTEM EVENT
Fire & CO Alarms
✓
Yes
✓
Yes ~ If Enabled [6]
✓
Yes
✓
Yes ~ If Enabled [6]
✓
Yes
✓
Yes ~ If Enabled [6]
Fire & CO Supervisory
Timeout
[2]
✓
Yes ~ If Enabled
[8]
N/A
✓
Yes
✗
No N/A
✓
Yes
✗
No N/A
Fire & CO Sensor Low
Battery
[2]
✓
Yes
~
If Enabled [8]
N/A
✓
Yes
✗
No
N/A
✓
Yes
✗
No
N/A
Console ( HELP button) Alarm
✓
Yes
✓
Yes
~
If Enabled
✓
Yes
✓
Yes
~
If Enabled
✓
Yes
✓
Yes
~
If Enabled
Emergency Sensor Alarm
✓
Yes
✓
Yes ~ If Enabled [6]
✓
Yes
✓
Yes ~ If Enabled [6]
✓
Yes
✓
Yes ~ If Enabled [6]
Emergency Sensor
Supervisory Timeout
[2]
~ If Enabled ~ If Enabled
[8]
N/A
✗
No
[1]
✗
No
[1]
N/A ~ If Enabled
✗
No
✗
No
Emergency Sensor Low
Battery
[2]
✓
Yes
~
If Enabled [8]
N/A
✓
Yes
✗
No [1]
N/A
✓
Yes
✗
No
N/A
Console Trouble [2] & [5]
✓
Yes
~
If Enabled
[8] & [9]
N/A
✓
Yes
✗
No
N/A
✓
Yes
✗
No
N/A
Communication Status
(telephone/cell)
✗
No
✓
Yes
N/A
✗
No
✓
Yes
N/A
✗
No
✗
No
N/A
Module Status
N/A
✓
Yes
N/A N/A
✗
No
N/A N/A
✗
No
N/A
Activity Monitor
✓
Yes
✓
Yes ~ If Enabled [7]
✗
No
✗
No
✗
No
✓
Yes
✓
Yes ~ If Enabled [7]
Temperature Alarms ~ If Enabled
[4]
~ If Enabled
[4]
~ If Enabled
[4]
~ If Enabled
[3]
~ If Enabled
[3]
~ If Enabled
[3]
~ If Enabled
[3]
~ If Enabled
[3]
~ If Enabled
[3]
Missed Reminder Messages
✓
Yes
[11]
✓
Yes ~ If Enabled
✗
No
✗
No
✗
No
✓
Yes
[11]
✓
Yes ~ If Enabled
Entering Mode
✓
Yes
From Away
Mode Only [10]
N/A
✓
Yes
✓
Yes
N/A
From Away
Mode Only
From Away
Mode Only
N/A