20
Cellular Voice & Internet Protocol (IP) Reporting
The PERS-4200 Console can be confi gured to communicate over-the-air
(OTA) using the optional add-on Model UMTS-3G Cellular Module. The
Module supports over-the-air data reporting for the PERS Console using
3G and voice communications through the carrier’s cellular telephone
network.
The settings for IP reporting using the cellular module are set in this area.
Primary Central Station #
The primary Central Station number is the number that will be dialed fi rst
in the dialing sequence for cellular voice calls. The number can be up to
20 digits including commas that each add a one second pause.
Secondary Central Station #
The secondary Central Station number is the number that will be dialed
second in the dialing sequence for cellular voice calls if the primary
number is unsuccessful. The number can be up to 20 digits including
commas that each add a one second pause.
FIBRO / IP Account Number
The FIBRO IP reporting protocol allows up to 10 digits in the account
number. PERS truncates the left-most digits of the account number to
fi t the reporting format used. The cellular module adds left-most zeroes
as necessary for IP reporting. Enter the account number used for IP
reporting for the specifi c Console.
DNIS / Line #
DNIS is used by the Central station to help identify accounts. This allows
there to be multiple panels sending SIA/Contact ID events using account
1234 for example. The DNIS may be transmitted to the automation
software/printer to ID account 1234 as belonging to Dealer X (DNIS
00001) and the other account 1234 as belong to Dealer Y (DNIS of
00002). If it is not used it should be sent as all 0’s and it will not allow the
SIA/Contact ID account numbers to be extended.
Callback
This is the cellular number used when a callback is performed for cellular
reporting. Note that an appropriate mobile terminated voice service plan
is needed to use this feature. The Two-Way Audio Mode must also be
enabled for callback to work.
Event Account Number
10 digit event account number to be used with the event code when
sending in a report.
FIBRO Heartbeat
Enter the time (in seconds) required by the Central Station receiver for
the FIBRO heartbeat. Default is 7200 seconds.
SIM ID
Displays the User Identity Module ID being used in the cellular module.
Management Server Timer
Enter the time (in minutes) for the periodic connection to the management
server used for over-the-air confi guration update and fi rmware download.
Default is 1200 seconds. Enter 0 to instruct the Console to NOT contact
the Management Server on startup.
Central Station IP Address
The area is for entering the Central Station’s primary and secondary IP
address’ and remote port numbers for the server that will be receiving
alarm reports from the Console. Enter the values required by the server.
Management Server IP Address
The area is for entering the Management Server’s primary and
secondary IP address’ and remote port numbers for the server managing
the Console’s confi guration and fi rmware. Enter the values required by
the server.
IP Reporting Format
Three Central Station IP reporting formats are available.
• SIA
• CID18 Extended
• CID58 Extended
CID18 EXTENDED
is the default format. Select one of the other formats if
required by the Central Station.
IP Service
The cellular service data network name string, also called the APN. For
example: wap.cingular or m2m.com.attz.
Port 1 & 2 Revision
This area displays the name and fi rmware revision number of any option
modules connected to the Console.
Cellular Network ID
Used to connect to a specifi c network. This specifi es the numeric network
identifi er, which is made from the Mobile Country Code (MCC) and
Mobile Network Code (MNC). Use 310410 for this value.
RA4200 Communicator Tab Cellular Voice / Internet Protocol (IP) Reporting Fields
