background image

40

21. Regulatory 

Information

We, Nortek Security & Control, LLC of 1950 Camino Vida Roble STE 
150, Carlsbad, CA 92008, declare under our sole responsibility that the 
device, PERS-4200 complies with Part 15 of the FCC rules.

This device complies with Part 15 FCC Rules. Operation is subject to 
the following two conditions: (1) This device may not cause harmful 
interference, and (2) This device must accept any interference received, 
including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for 
Class B Digital Device, pursuant to Part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates and 
can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by 
turning the equipment off and on, the User is encouraged to try to correct 
the interference by one or more of the following measures.

•  Reorient or relocate the receiving antenna

•  Increase the separation between the equipment and receiver

•  Connect the equipment into an outlet on a circuit different from that to which 

the receiver is connected

•  Consult the dealer or an experienced radio/TV technician for help

WARNING:

Any changes or modifi cations not expressly approved by the party 
responsible for compliance could void the User’s authority to operate the 
equipment.

This device complies with Industry Canada licence-exempt RSS 
standard(s). Operation is subject to the following two conditions: (1) this 
device may not cause interference, and (2) this device must accept any 
interference, including interference that may cause undesired operation 
of the device.

Les changements ou modifi cations non approuvés expressément par 
la partie responsable de la conformité pourrait annuler l’autorité de 
l’utilisateur à faire fonctionner l’équipement

Le présent appareil est conforme aux CNR d’Industrie Canada 
applicables aux appareils radio exempts de licence. L’exploitation est 
autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas 
produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout 
brouillage radioélectrique subi, même si le brouillage est susceptible 
d’en compromettre le fonctionnement.

22. Limited 

Warranty

This Nortek Security & Control product is warranted against defects 
in material and workmanship for twelve (12) months. 

This warranty 

extends only to wholesale Customers 

who buy direct from Nortek 

Security & Control or through Nortek Security & Control’s normal 
distribution channels. 

Nortek Security & Control does not warrant 

this product to consumers. 

Consumers should inquire from their selling 

dealer as to the nature of the dealer’s warranty, if any. 

There are no 

obligations or liabilities on the part of Nortek Security & Control 
for consequential damages arising out of or in connection with 
use or performance of this product or other indirect damages with 
respect to loss of property, revenue, or profi t, or cost of removal, 
installation, or reinstallation.

 All implied warranties, including implied 

warranties for merchantability and implied warranties for fi tness, are 
valid only until Warranty Expiration Date as labeled on the product. 

This Nortek Security & Control LLC Warranty is in lieu of all other 
warranties express or implied.

All products returned for warranty service require a Return Authorization 
Number (RA#). Contact Nortek Security & Control Returns at 
1-855-546-3351 for an RA# and other important details.

IMPORTANT WIRELESS INFORMATION

Radio controls provide a reliable communications link and fi ll an important 
need in portable wireless signaling. However, there are some limitations 
which must be observed.

•  For U.S. installations only: The radios are required to comply with FCC 

Rules and Regulations as Part 15 devices. As such, they have limited 
transmitter power and therefore limited range.

•  A receiver cannot respond to more than one transmitted signal at a 

time and may be blocked by radio signals that occur on or near their 
operating frequencies, regardless of code settings.

•  Infrequently used radio links should be tested regularly to protect 

against undetected interference or fault.

•  A general knowledge of radio and its vagaries should be gained prior 

to acting as a wholesale distributor or dealer, and these facts should 
be communicated to the ultimate users. 

Summary of Contents for Linear PERS-4200













































Reviews: