background image

26

 Reminder Time Slot Settings

There are eight standard reminder message time slots that can be 
programmed and one time slot for the system test reminder. Each time 
slot has options that can be set.

 Slot  Enable

 

SLOT ENABLE

 check boxes are displayed for each of the nine reminder 

message time slots. Checking a 

SLOT ENABLE

 check box will enable 

the reminder message that is programmed in that time slot.

A reminder message that’s already programmed can be temporarily 
disabled by un-checking this check box without loosing the reminder 
message settings.

 Send  Report

SEND REPORT

 check boxes are displayed for each of the eight standard 

reminder message time slots. Checking a  

SEND REPORT

 check box 

for a reminder message time slot will cause the Console to report a 
non-acknowledged reminder message to the Central Station.

 

NOTE: For any time slot to report, the global setting for missed reminder 
reports must be enabled in the Reminder Settings area.

 Reminder  Type

Four types of reminder messages are available:

•  

Medication reminder

•  

Ride reminder

•  

Appointment reminder

•  

Alarm

Select the desired type of reminder message for the time slot. When the 
selection is made, the Schedule Type dialog box will display.

 Schedule  Type

Viewing or changing the reminder type or schedule type will display the 
Schedule Type dialog box. This area is for selecting the dates and times 
that a reminder message will sound.

A reminder message can be scheduled for 

ONE TIME

DAILY

WEEKLY

or 

MONTHLY

 with the Schedule Type selection.

Once a schedule is set, it will be displayed in the 

SCHEDULE SUMMARY

 

area.

Creating or  Editing Reminder Messages

Use the following steps to setup a reminder message. Different options 
will be displayed depending on the type of message.

1. 

Choose a reminder message type.

2. 

Select One Time, Daily, Weekly, or Monthly for the Schedule Type.

3. 

Select the date(s) and time(s) that the reminder message will sound.

4. 

For ride or appointment messages, select the time for the ride or 
appointment to announce during the message.

5. 

Check the  

SLOT ENABLE

 check box to enable the reminder message 

time slot. The schedule displayed for the time slot will be grayed until 
it is enabled.

6. 

Check the  

SEND REPORT

 check box to have the Console send a 

report if this reminder message is 

not

 acknowledged. (Global missed 

reminder reports must be enabled also.)

 Automatic Test Reminder Messages

Test reminder messages are scheduled as a monthly event. When the 
programmed test reminder day and time are reached, the test reminder 
message is announced and repeats once every three minutes until 
silenced by pressing an emergency transmitter button.

 

NOTE: The test reminder cannot be cancelled and will not time out. The 
Console will continue to announce “Attention: It is time to test your 
PERS.....” until a pendant is activated to test the system.

 

NOTE: The test reminder message is enabled only in Home Mode and 
Night Mode. It is disabled when in Away Mode.

 Setting Test Reminder Messages

Automatic Test Reminders Messages are enabled and set on the 
Reminder Messages tab.

1. 

To enable Test Reminder Messages, the Dealer or Installer should check 
the #9 SLOT ENABLE box.

2. 

Click the 

TEST REMINDER

 button.

3. 

Select a Day of Month and Time for the monthly test message to occur.

4. 

Click OK.

 Test Reminder Operation

When the programmed system test time occurs, a reminder chime 
sounds and the Console announces:

 

0

“Attention... It is time to test your personal emergency 
system... Please press your personal help button”

 

NOTE: The test announcement will repeat every three minutes regardless 
of the  AUDIO REPLAY DURIN

G

 TIMEOUT reminder message setting.

When the User activates their emergency transmitter, the Console will 
send a test report to the Central Station, then start a two-way audio 
session. The Central Station operator typically acknowledges the test 
report with the User using two-way audio, then disconnects.

 

IMPORTANT: IF USIN

G

 THE TEST  REMINDER  MESSA

G

E FEATURE, 

TWO-WAY AUDIO SHOULD BE ENABLED SO THAT THE CENTRAL 
STATION CAN ACKNOWLED

G

E THE TEST WITH THE  USER.

One Time Reminder

Schedule

Weekly Reminder

Schedule

Monthly Reminder

Schedule

Daily Reminder

Schedule

Summary of Contents for Linear PERS-4200













































Reviews: