background image

User Guide

www.yealink.com

DECT Repeater 

RT10 

The following items are included in your package:

Packaging Contents

Repeater

Power Adapter

User Guide

DECT Repeater RT10 User Guide

Screw

Screw Anchor

Overview

DC Jack

LED Indicator

Appearance Instructions

LED Status

The DECT repeater has one LED indicator describing the repeater operations. The 
following table provides instructions on repeater operations and LED indications. 

Wall Mount

     Hole

LED

Indication

Operation

Power off

Off

Slowly flashes

Unregistered, searching for base station.

Searching for base station in the registration 

mode or performing registration procedure. 

Double flashes

Red

Red

Summary of Contents for DECT RT10

Page 1: ...icator Appearance Instructions LED Status The DECT repeater has one LED indicator describing the repeater operations The following table provides instructions on repeater operations and LED indications Wall Mount Hole LED Indication Operation Power off Off Slowly flashes Unregistered searching for base station Searching for base station in the registration mode or performing registration procedure...

Page 2: ...gs as shown in the figure below It is not possible to install the repeaters in series or daisy chain The maximum number of handsets that can be registered to your base station is not affected by the repeater The repeater can be used to extend the coverage range in all directions allowing several floors to be covered The automatic handover process is seamless If the repeater is placed correctly ove...

Page 3: ... power adapter 2 Switch it on for 1 to 5 seconds and switch it off again 3 Switch it on for 25 to 35 seconds and switch it off again Now the repeater is ready for a new auto registration To achieve optimum performance for the repeater it is important to find a good location Here are a few tips for placing repeaters Choose a rasied position for both the base station and repeater wherever possible W...

Page 4: ... verification tone allows you to easily check the extent of the repeater s coverage area The tone is audible on the handset during a call Verification Tone To activate the verification tone on the repeater Place a call using the handset to check whether the handset is working in the extended area of the repeater If the call is successfully handled by the repeater you can hear the verification tone...

Reviews: