Maintenance
5-4
P/N 7146386A
E
2008 Nordson Corporation
VBN w/o Control System
Preventive Maintenance
(contd.)
Melter part
Activity
Interval
Refer to
Filling valve (option)
Check control module
detection hole; replace
complete control module
if necessary
When excess material seeps out
of detection hole
(seals in inside worn)
5-21
Clean or replace filter
cartridge
Depending on degree of material
pollution
5-22
External Cleaning
External cleaning prevents impurities created during production from
causing the melter to malfunction.
CAUTION:
Observe the unit’s Degree of Protection when cleaning (Refer
to section
Technical Data
).
CAUTION:
Do not damage or remove safety labels. Damaged or removed
safety labels must be replaced by new ones.
Remove material residue only with a cleaning agent recommended by the
material supplier. Heat with an air heater if necessary.
Remove dust, flakes etc. with a vacuum cleaner or a soft cloth.
Nordson recommends the orange cleaning agent P/N 771192 (12 spray
bottles, 0.5 l each).
Summary of Contents for VersaBlue 100H/100H
Page 46: ...Installation 3 14 P N 7146386A E 2008 Nordson Corporation VBN w o Control System...
Page 74: ...Maintenance 5 24 P N 7146386A E 2008 Nordson Corporation VBN w o Control System...
Page 94: ...Repair 7 14 P N 7146386A E 2008 Nordson Corporation VBN w o Control System...
Page 96: ...Parts 8 2 P N 7146386A E 2008 Nordson Corporation VBN w o Control System...