Nordson VersaBlue 100H/100H, Manual

Page: 15 / 108

Safety
1-5
E 2004 Nordson Corporation
A1EN − 01 − [XX − SAFE] − 10
Installation Practices
S
Install the equipment in accordance with the instructions provided in this
document and in the documentation provided with auxiliary devices.
S
Ensure that the equipment is rated for the environment in which it will be
used and that the processing characteristics of the material will not
create a hazardous environment. Refer to the Material Safety Data
Sheet (MSDS) for the material.
S
If the required installation configuration does not match the installation
instructions, contact your Nordson representative for assistance.
S
Position the equipment for safe operation. Observe the requirements for
clearance between the equipment and other objects.
S
Install lockable power disconnects to isolate the equipment and all
independently powered auxiliary devices from their power sources.
S
Properly ground all equipment. Contact your local building code
enforcement agency for specific requirements.
S
Ensure that fuses of the correct type and rating are installed in fused
equipment.
S
Contact the authority having jurisdiction to determine the requirement for
installation permits or inspections.
Operating Practices
S
Familiarize yourself with the location and operation of all safety devices
and indicators.
S
Confirm that the equipment, including all safety devices (guards,
interlocks, etc.), is in good working order and that the required
environmental conditions exist.
S
Use the personal protective equipment (PPE) specified for each task.
Refer to
Equipment Safety Information or the material manufacturer’s
instructions and MSDS for PPE requirements.
S
Do not use equipment that is malfunctioning or shows signs of a
potential malfunction.