Nordson VersaBlue 100H/100H, Manual

Page: 47 / 108

Operation
4-1
P/N 7146386A
E 2008 Nordson Corporation
VBN w/o Control System
Section 4
Operation
WARNING: Allow only qualified personnel to perform the following tasks.
Observe and follow the safety instructions in this document and all other
related documentation.
Filling the Tank
CAUTION: Cease operation before the tank is completely empty. If there is
too little material in the tank, the material can overheat. Overheated material
can char, collect on surfaces and cause malfunctioning.
Manually
WARNING: Hot! Risk of burns. Wear appropriate protective
clothing/equipment. Tank and tank lid are hot. When filling, hot material may
splash out of the tank. Use caution when filling tank with material.
CAUTION: Do not operate melter with open tank. When the tank is open,
hot material vapors can escape; vapors may contain potentially hazardous
substances.
CAUTION: Before filling the tank, ensure that the tank and material are
clean and free of foreign material. Foreign substances can hinder
functioning or even cause damage to the melter or accessories.
Fig. 4-1