Nordson Encore iControl 2, Configuration, Preset Setup, Operation

Page: 52 / 168

Standard System Configuration
3-32
Part 1056418-07
E 2019 Nordson Corporation
Data Backup
(contd)
2
1
1
2
2
1
Old-Style Adapter New-Style Adapter
3
3
Dynics PC Card Slots HMI PC − Card Adapters
iControl 2 PC Card Slots
2
1
3
Figure 3-30 Compact Flash Card Locations
1. User data card 2. Program card 3. Eject button(s)
6. Insert a new CompactFlash card in the card slot.
CAUTION: All data on the new card will be overwritten.
7. Turn on console power.
The console will boot up and copy your data to the new card. Store the
original card in a safe place away from magnetic fields. If the card has
not been formatted or was formatted by an earlier version of the iControl
software, the iControl system formats the card before writing to it.
Software and Firmware Versions
Touch the About button on the System Configuration screen to open a
screen that lists the iControl software and firmware versions, and the
console TCP/IP address (en0 IPA: en0 = internal network interface, IPA =
internet protocol address. When not connected to an external network the
address will be 0.0.0.0).
If you are calling for technical support, you may be asked for version
numbers along with the details of your problem.