Nordson Encore iControl 2, Configuration, Preset Setup, Operation

Page: 107 / 168

Spray Gun Preset Settings
5-19
Part 1056418-07
E
2019 Nordson Corporation
Copy All: Gun Control Screen
The Copy All function on the Gun Control screens copies only the flow and
electrostatic settings for the current preset to all presets with the same
number for all guns.
For example, if the current preset is preset 1 for gun 1 and you have 16
guns in your system, the Copy All function copies preset 1 flow and
electrostatic settings to preset 1 for guns 2 to 16.
To use the Gun Control screen Copy All function:
1. Select the preset number to use as the source.
2. Touch the
Copy All button. The Copy All confirmation screen opens.
3. Touch the OK button to start copying. If you change your mind touch
the Cancel button.
Copy All
OK
Cancel
Figure 5-17 Copy All: Gun Control Screen
Copy All: Preset Table Screen
The Copy All function on the Preset Table screen copies the selected
preset settings for Gun 1 to the same preset for all other guns. For
example, if preset 1 is the current preset the Copy All function copies the
selected preset 1 settings for gun 1 to preset 1 for all the guns listed.
1. Select the preset number to use as the source.
2. Select the settings to copy by touching the setting buttons. When
selected, an X appears in the selection box on the button.
3. Touch the Copy All button. The settings you selected are copied to the
rest of the guns.
4. Touch the Save button to save your changes.
NOTE: If you Save your changes they are written to the database. To
cancel your changes, including a Copy All operation, do not touch the
Save button . Close the screen and touch the Cancel button on the dialog
that asks if you want to save your changes.
Selected Settings
Copy All Save
Figure 5-18 Copy All: Preset Table Screen