Nordson Encore iControl 2, Configuration, Preset Setup, Operation

Page: 105 / 168

Spray Gun Preset Settings
5-17
Part 1056418-07
E
2019 Nordson Corporation
Restricted Spray Example
Use restricted spray to prevent powder wrap around the leading and trailing
edges of parts.
See Figure 5-14. Lead = − 5, Lag = − 5. The guns start spraying 5 units
AFTER the leading edge of the part reaches the guns, and stop spraying 5
units BEFORE the trailing edge of the part reaches the guns.
Conveyor Direction
Lead = − 5
Gun On
Lag = − 5
Gun Off
Figure 5-14 Restricted Spray
Extended-Restricted Spray Example
Use extended-restricted spray to wrap around one end of a part and not the
other.
See Figure 5-15. Lead = 5, Lag = − 5. The guns start spraying 5 units
BEFORE the leading edge of the part reaches the guns, and stop spraying
3 units BEFORE the trailing edge of the part reaches the guns.
Lead = 5
Gun On
Lag = − 5
Gun OFF
Conveyor Direction
Figure 5-15 Extended-Restricted Spray