26
Figure 3
The user will be prompted for recipe confirmation and upon conformation click ‘YES’, the software
will now run the selected recipe and monitor the oven parameters via the Main Overview Screen.
B. Main Overview Screen
The Main Overview Screen is a graphical representation of the Asymtek oven. Depending on the
individual configuration of the oven, many different parameters and controls will be displayed.
This is the central screen / view of the program and will appear after logging on and a recipe has
been loaded. The Main Overview Screen also serves as the recipe editor (
See
Figure 4
). Note the
green status bar at the bottom left of Figure 4 with the message “Communicating with Hc2”. This
applies only to ovens with the HC2 oven controller. There will be no message displayed for ovens
with the HC1 oven controller.
Figure 4
Summary of Contents for TCM-2200
