Nordson ASYMTEK TCM-2200, Operation Manual, Troubleshooting And Maintenance Manual

Page: 21 / 125

17
I. Unpacking
The Asymtek oven is packed in two containers. The large skid contains the Cure unit. The corrugated
box contains a computer, keyboard, color monitor and connection cables. (For international
shipments this computer system is packed inside the crate). Backup software disks and profile
thermocouples are packaged with the instruction manual inside the computer box. The signal light
tower will be packaged with the Cure unit in a cardboard tube and may be installed on the entrance
end of the oven by plugging in the connector and installing four mounting screws.
To remove the oven from the skid it will be necessary to remove lag screws (Remove panels to
access lag screws) from the bottom cross tube of frame. (
See Figure 1 ) The oven may now be lifted
from the skid with a min 3.6 Metric Ton (8000 pound) capacity forklift and moved into position by
means of the casters mounted to the oven base.
Figure 1
IMPORTANT: Lift the oven from the center ONLY. The unit may fall from the forklift if not lifted
FROM THE CENTER. See
figure 2 below for location of both lifting points.
Figure 2
Immediately check all components for any apparent damage.
TCM-3300 ASYMTEK