Nordson ASYMTEK TCM-2200, Operation Manual, Troubleshooting And Maintenance Manual

Page: 22 / 125

18
II. General Operating Conditions
Ambient Operating Temperature - The equipment should be operated in an ambient temperature
range of 5 to 32
o
C (41 to 89.6
o
F) under no load to full load conditions.
Relative Humidity - The equipment should operate within a relative humidity range of 20% - 95%
(non-condensing).
Altitude - The equipment should be limited to be used at altitudes up to 1500 m above mean sea
level.
Transportation and Storage - The equipment is designed to withstand storage and transportation
temperatures within the range of -25°C to 55
o
C (-13°F to +131
o
F). Suitable means are provided to
prevent damage from excessive moisture, vibration, stress and mechanical shock during shipment.
Specification Compliance Limits/Immunity Level
Radiated Emission EN 55011 Meets Group Class A Limits
Radiated RF Immunity EN 61000-4-2 80 -1000 MHz & 900+5 MHz @ 10V/m
Sound/Noise Level SEMI S2.27.1 Maximum - 67db
Vibration MIL-STD-45662A Maximum - 0.07G
III. Power Requirements
Table 1 shows the service conductor current capacity required for all Asymtek oven models. Use
branch over-current device rated at amperes described in tables below. Please refer to the serial tag
on the machine and/or warning labels near the main terminals for the correct machine voltage and
current. Caution: Use a voltmeter to verify the proper voltage before connecting the machine.
Table
1A shows standard oven required current capacity.
Model Voltage
⇒
⇓
208, 240 Volts
3 phase (50/60 Hz)
380, 400, 415 or 480 Volts
3 phase (50/60 Hz)
TCM-2200 100 Amps / phase 100 Amps / phase
TCM-3300 100 Amps / phase 100 Amps / phase
TCM-4600 130 Amps / phase 100 Amps / phase
Table 1A
CE Models are wired for either 63 Amps or 100Amps as a maximum current draw for high and low
voltages. Please refer to the serial tag for correct voltage and current.
Table 1B shows CE oven
required current capacity. For other currents or voltages, please consult the factory.
Model Voltage
⇒
⇓
208, 240 Volts
3 phase (50/60 Hz)
380, 400, 415 or 480 Volts
3 phase (50/60 Hz)
TCM-2200 63 or 100 Amps / phase 63 or 100 Amps / phase
TCM-3300 63 or 100 Amps / phase 63 or 100 Amps / phase
TCM-4600 100 Amps/phase 63 or 100 Amps / phase
Table 1B