Nokia M11 T66220, User Manual

Page: 135 / 169

Nokia M11 User’s Manual
E
Copyright Nokia Networks Oy C33833001SE_00 5-80
Command Enable/disable LCP echoing
Description Specifies whether you want your M11 to send LCP
echo requests on the specified ATM channel.
Syntax set ppp module {vccx} lcp-echo-requests [on|off]
Arguments The first argument identifies the ATM channel (vccx,
x = 1 ... 8). The second argument enables/disables
LCP echoing. You must turn off LCP echoing if you do
not want M11 to drop a PPP link to a nonresponsive
peer.
Example
M11> set ppp module vcc2 lcp-echo-re-
quests off
Command Set Configure-NAK failure maximum
Description Specifies the maximum number of Configure-NAK
messages the PPP module can send without having
sent a Configure-ACK message request on the speci-
fied ATM channel.
Syntax set ppp module {vccx} failures-max [integer]
Arguments The first argument identifies the ATM channel (vccx,
x = 1 ... 8).
The
integer
argument can be any number
between 1 and 20.
Example
M11> set ppp module vcc2 failures-max 10
Command Set unacknowledged configuration request maxi-
mum
Description Specifies the maximum number of unacknowledged
configuration requests that your M11 will send to the
specified ATM channel.
Syntax set ppp module {vccx} configure-max [integer]
Arguments The first argument identifies the ATM channel (vccx,
x = 1 ... 8). The
integer
argument can be any number
between 1 and 10.
Example
M11> set ppp module vcc2 configure-max 10