Nokia M11 T66220, User Manual

Page: 123 / 169

Nokia M11 User’s Manual
E
Copyright Nokia Networks Oy C33833001SE_00 5-68
Command Enable proxy ARP function on channels using PPP
over ATM encapsulation in bridged mode
Description Specifies whether you want M11 to act as a address
resolution proxy server on your LAN for the IP address-
es behind the specified ATM link using PPP over ATM
encapsulation in bridged mode.
Syntax set ip wan {vccx} proxy-arp [on|off]
Arguments The first argument identifies the ATM channel (vccx,
x = 1 ... 8). If there is only one ATM channel using ppp-
vcmux encapsulation, you can leave the argument
vccx
out. The second argument is enables/disables
proxy ARP function.
Example
M11> set ip wan vcc2 proxy-arp on
Command Enable/disable RIP send function on channels
using PPP over ATM encapsulation in bridged mo-
de
Description Specifies whether M11 should use Routing information
protocol (RIP) broadcasts to advertise its routing tables
to router on the other side of the specified ATM link
using PPP over ATM encapsulation in bridged mode
(BNCP option on).
Syntax set ip wan {vccx} rip-send [off | v1 | v2 | v1-compat]
Arguments The first argument identifies the ATM channel (vccx,
x = 1 ... 8). If there is only one ATM channel using PPP
over ATM encapsulation in bridged mode, you can
leave the argument
vccx
out. Both RIP version 1 and
RIP version 2 functionalities can be simultaneously acti-
vated.
v1-compat
argument enables the sending of
RIPv2 packets using IP broadcast. RIP cannot be acti-
vated if address mapping is ON.
Example
M11> set ip wan vcc2 rip-send off