Nokia M11 T66220, User Manual

Page: 118 / 169

Management
E
Copyright Nokia Networks Oy C33833001SE_00
5-63
Command Enable address resolution proxy server function on
channels using IP over ATM or bridged encapsula-
tions
Description Specifies whether you want M11 to act as a address
resolution proxy server on your LAN for the IP address-
es behind the specified ATM link using ip-llc, ip-vcmux,
ether-llc, or ether-vcmux encapsulation.
Syntax set ip dsl {vccx} proxy-arp [on|off]
Arguments The first argument identifies the ATM channel (vccx,
x = 1 ... 8) . The second argument enables/disables the
proxy ARP function. If there is only one ATM channel
using one of these encapsulations, you can leave the
argument
vccx
out.
Example
M11> set ip dsl vcc2 proxy-arp off
Command Enable/disable RIP send function on channels
using IP over ATM or bridged encapsulations
Description Specifies whether M11 should use Routing information
protocol (RIP) broadcasts to advertise its routing tables
to router on the other side of the specified ATM link
using ip-llc, ip-vcmux, ether-llc, or ether-vcmux encap-
sulation.
Syntax set ip dsl {vccx} rip-send [off | v1 | v2 | v1-compat]
Arguments The first argument identifies the ATM channel (vccx,
x = 1 ... 8). If there is only one ATM channel using one
of these encapsulations, you can leave the argument
vccx
out. Both RIP version 1 and RIP version 2 func-
tionalities can be simultaneously activated.
v1-compat
argument enables the sending of RIPv2 packets using
IP broadcast. RIP cannot be activated if address map-
ping is ON.
Example
M11> set ip dsl {vccx} rip-send off