Nokia M11 T66220, User Manual

Page: 138 / 169

Management
E
Copyright Nokia Networks Oy C33833001SE_00
5-83
Command Enable/disable PAP port authentication
Description Enables/disables PAP authentication on the specified
ATM channel. PAP authentication must be enabled be-
fore you can enter other PAP information. If you disable
PAP authentication and save the modified settings,
your M11 retains its PAP settings.
Syntax set ppp module {vccx} port-authentication pap-option
[on|off]
Arguments The first argument identifies the ATM channel (vccx,
x = 1 ... 8). The second argument enables/disables PAP
port authentication.
Example
M11> set ppp module vcc2 port-authentica-
tion pap-option on
Command Set PAP user name
Description Defines the name M11 sends in a PAP response packet
on the specified ATM channel.
Syntax set ppp module {vccx} port-authentication pap-name
[pap_name]
Arguments The first argument identifies the ATM channel (vccx,
x = 1 ... 8). The
pap_name
argument consists of 1 - 32
alphanumeric characters. The information you enter
must match the PAP username configured in the re-
mote PPP peer’s authentication database. Your service
provider will give you the PAP user name.
Example
M11> set ppp module vcc2 port-authentica-
tion pap-name myname