Nokia M11 T66220, User Manual

Page: 100 / 169

Management
E
Copyright Nokia Networks Oy C33833001SE_00
5-45
M11 (top)>> set system
Stepping set mode (press Control-X <Enter> to exit)
system
name (”M11”): Kutoja
Diagnostic Level (High): medium
Stepping mode ended
See Chapter 4 for step mode installation examples.
Validating your configuration
You can use the
validate
command to make sure that your
configuration settings have been entered correctly. If you use the
validate
command, M11 verifies that all required settings are
present and that the settings are consistent.
M11 (top)>> validate
Error: Subnet mask is incorrect
Global Validation did not pass inspection!
You can use the
validate
command to verify your configuration
settings at any time. Your M11 automatically validates your
configuration any time you save a modified configuration.
Config command reference
The top level configuration command nodes are listed below:
D
system M11 system options
D
preference CLI preferences
D
dmt DMT (ADSL) option
D
atm ATM options
D
bncp BNCP options
D
ip TCP/IP options
D
location Location Manager options
D
dhcp DHCP options
D
dns DNS options
D
bridge Bridge options
D
snmp SNMP options
D
ppp PPP options
D
pinhole NAT/NAPT server configuration
D
servers Local integrated server configuration
The sections below explain the commands under each top level
configuration node.