Nokia M11 T66220, User Manual

Page: 147 / 169

Nokia M11 User’s Manual
E
Copyright Nokia Networks Oy C33833001SE_00 5-92
5.4 Software download
New software can be downloaded to M11 through the 10Base-T
Ethernet interface or through one of the active ATM channels. Nokia
M11 uses Trivial File Transfer Protocol (TFTP) to download the
software from a TFTP server located on the Ethernet LAN. The
downloading is activated from the console port using the following
CLI command:
install [server_address] [filename] {confirm}
Command Download software update
Description Downloads a new version of the Nokia M11 operating
software from a TFTP (Trivial File Transfer Protocol)
server, validates the software image, and programs the
image into the Nokia M11 memory. After you install new
operating software, you must restart M11.
Syntax install [server_address] [filename] {confirm}
Arguments The TFTP server must be accessible on your Ethernet
network or through one of the active ATM virtual chan-
nels and a route to the server must exist. The
server
address
argument identifies the IP address of the
TFTP server on which your Nokia M11 operating soft-
ware is stored. The
filename
argument identifies the
path and name of the operating software file on the
TFTP server. If you include the optional
confirm
key-
word, you will not be prompted to identify a TFTP
server or file name. Your Nokia M11 begins the soft-
ware installation using its default boot settings.
Example
M11> install 192.168.1.1 M11c_500.d39
*** WARNING *** YOU ARE ABOUT TO ERASE
AND REPROGRAM THE NOKIA M11’S PERMANENT
SOFTWARE STORAGE WITH A NEW SOFTWARE VER-
SION OBTAINED VIA THE TFTP PROTOCOL.
About to install new Flash EPROM software
image:
server: 192.168.1.1
file: “M11c_500.d39”
Do you wish to proceed? (type ’yes’ to
confirm): yes
Installing
M11>