Nokia M11 T66220, User Manual

Page: 117 / 169

Nokia M11 User’s Manual
E
Copyright Nokia Networks Oy C33833001SE_00 5-62
Command Set network mask to channels using IP over ATM or
bridged encapsulations
Description Assigns an IP network mask to the specified logical
ATM channel using ip-llc, ip-vcmux, ether-llc, or ether-
vcmux encapsulation.
Syntax set ip dsl {vccx} netmask [netmask]
Arguments The first argument identifies the ATM channel (vccx,
x = 1 ... 8). The second argument is the network mask
for that channel. If there is only one ATM channel using
one of these encapsulations, you can leave the argu-
ment
vccx
out. If you enter 0.0.0.0 as the network
mask, M11 will retrieve the IP address through the re-
mote peer using Dynamic Host Configuration Protocol.
Example
M11> set ip dsl vcc2 netmask 0.0.0.0
Command Enable/disable address mapping on channels
using IP over ATM or bridged encapsulations
Description Specifies whether you want M11 to use NAPT on the
specified ATM link (vccx, x = 1 ... 8) using ip-llc, ip-
vcmux, ether-llc, or ether-vcmux encapsulation when
communicating with remote routers. Address mapping
lets you conceal details of your network from remote
routers. This is useful when connecting to an Internet
Service Provider.
Syntax set ip dsl {vccx} addr-mapping [on|off]
Arguments The first argument identifies the ATM channel (vccx,
x = 1 ... 8). The second argument enables/disables ad-
dress mapping on that channel. If there is only one
ATM channel using one of these encapsulations, you
can leave the argument
vccx
out.
Example
M11> set ip dsl vcc2 addr-mapping off