Nokia M11 T66220, User Manual

Page: 97 / 169

Nokia M11 User’s Manual
E
Copyright Nokia Networks Oy C33833001SE_00 5-42
Config prompt
You reach the configuration mode of the M11 CLI by typing
config
at
the Root prompt. When you are in Config mode, the CLI prompt
consists of the name of your M11 followed by your current node in the
hierarchy and two angle brackets (>>). For example, when you enter
Config mode (by typing
config
at the Root prompt), the
M11
(top)>>
prompt reminds you that you are at the top of the Config
hierarchy. If you move to the
ip
node in the Config hierarchy (by
typing
ip
at the Config prompt), the prompt changes to
M11 (ip)>>
to
identify your current location.
Navigating the Config hierarchy
You start at the
top
when you enter Config mode. The command line
interface reminds you of your location by showing your current node
after the M11 name:
M11 (top)>>
D
Moving from Config to Root
You can navigate from anywhere in the Config hierarchy back to
the Root level by issuing the
quit
command at the Config
command prompt and pressing
ENTER
.
M11 (top)>> quit
M11>
D
Moving from top to a subnode
You can navigate from the top node to a subnode by entering the
node name (or the significant letters of the node name) at the
Config prompt and pressing Enter. For example, you move to the
ip subnode by entering
ip
and pressing Enter.
M11 (top)>> ip
M11 (ip)>>
As a shortcut, you can use the significant letters of the node in
place of the full node name at the Config prompt. The significant
characters of a node name are the letters that uniquely identify the
node. For example, only the
atm
Config node starts with a, you
could enter one letter (a) to move to the atm node.
M11 (top)>> a
M11 (atm)>>