Nokia M11 T66220, User Manual

Page: 82 / 169

Management
E
Copyright Nokia Networks Oy C33833001SE_00
5-27
D
ping
to send ICMP Echo request
D
atmping
to send ATM OAM loopback
D
arp
to send ARP request
D
quit
to quit shell
D
reset
to reset subsystems
D
restart
to restart unit
D
show
to show system information
D
start
to start subsystem
D
status
to show basic status of unit
D
telnet
to telnet to a remote host
D
who
to show who is using the shell
D
log
to add a message to the diagnostic log
D
loglevel
to report or change diagnostic log level
D
install
to download and program an image
into flash
D
download
to download a config file
D
upload
to upload a config file
D
clear
to erase all stored configuration
information
The following tables present the Root commands, their detailed
descriptions, syntax and usage examples.
Command Send ARP request
Description Sends an Address Resolution Protocol request to
match the nnn.nnn.nnn.nnn IP address to an Ethernet
hardware address.
Syntax arp [nnn.nnn.nnn.nnn]
Arguments The argument is an IP string which consists of four
decimal numbers with values between 0 and 255 sep-
arated by dots.
Example
M11> arp 192.221.11.11