Nokia M11 T66220, User Manual

Page: 119 / 169

Nokia M11 User’s Manual
E
Copyright Nokia Networks Oy C33833001SE_00 5-64
Command Enable/disable RIP receive function on channels
using IP over ATM or bridged encapsulations
Description Specifies whether M11 should use Routing information
protocol (RIP) broadcasts to update its routing tables
with information received from other routers on the
other side of the specified ATM link using ip-llc, ip-
vcmux, ether-llc, or ether-vcmux encapsulation.
Syntax set ip dsl {vccx} rip-receive [off | v1 | v2 | v1-compat]
Arguments The first argument identifies the ATM channel (vccx,
x = 1 ... 8). If there is only one ATM channel using one
of these encapsulations, you can leave the argument
vccx
out. Both RIP version 1 and RIP version 2 func-
tionalities can be simultaneously activated.
v1-compat
argument enables the receiving of both RIPv1 and
RIPv2 packets. RIP cannot be activated if address
mapping is ON.
Example
M11> set ip dsl vcc2 rip-receive off
Command Flush routes
Description Enabled
flush routes
function deletes the learned
routes from the routing table when the PPP connection
is disconnected. Address mapping must be off.
Syntax flush-routes [on|off]
Arguments The argument enables/disables the flush routes func-
tion.
Example
M11> flush-routes on