Nokia M11 T66220, User Manual

Page: 85 / 169

Nokia M11 User’s Manual
E
Copyright Nokia Networks Oy C33833001SE_00 5-30
Command Ping
Description Causes the Nokia M11 to send a series of ICMP Echo
requests for the device with the specified IP address.
You can use the
ping
command to determine whether
an IP address is already in use on your network. You
cannot use the
ping
command to ping the Nokia M11’s
own IP address. If a host using the specified IP address
is active, it returns one or more ICMP Echo replies,
confirming that it is accessible from your network.
Syntax ping [ip_address]
Arguments
ip_address
argument is the IP address, in dotted
decimal notation, of the device you want to locate.
Example
M11> ping 192.122.12.11
Command ATM ping
Description Sends 5 OAM F5 loopback cells to the specified VPI/
VCI destination with a 5 second total timeout interval.
Syntax atmping [vpi] [vci] [segment | end-to-end]
Arguments
vpi
and
vci
specify the channel and the third argu-
ment specifies segment or end-to-end loopback.
Example
M11> atmping 0 100 segment
Command Exit
Description Exits the Nokia M11 command line interface.
Syntax quit
Arguments None.
Example
M11> quit
Command Reset ATM statistics
Description Resets ATM statistics to zero.
Syntax reset atm
Arguments None
Example
M11> reset atm