}
Figure 6-8 IP/MAC Binding List - Example Three
6.2.1.6 Configure an Internet Blacklist
If you want to configure an Internet blacklist, do the following:
Step 1
Go to the
User Management > IP/MAC Binding
page, and then click the
Add
button or select the
Binding Settings
tab to go to the setup page.
Step 2
Specify the illegal users by creating the IP/MAC bindings. There are three
methods:
Method One:
Bind each illegal user
’s IP address to a MAC address which is different
from any LAN host
’s in the
IP/MAC Binding List
.
Method Two:
Bind an IP address which is different from any LAN host
’s to each illegal
user
’s MAC address in the
IP/MAC Binding List
.
Method Three:
Add these users
’ IP and MAC address pairs in
the
IP/MAC Binding
List
. Unselect each IP/MAC binding
’s
Allow
check box respectively, then the matched
users can not access the Device and Internet.
Step 3
Select the
Allow Undefined LAN PCs
check box to allow all the undefined
users to access the Device and Internet.
For example, if you want to block a LAN user with IP address 192.168.16.68 and MAC
address 0015c5674109 from accessing the Device and Internet, you can add the
corresponding IP/MAC binding in the
IP/MAC Binding List
. And then unselect the
