}
1.5
Connecting the Device
Before you install the Device, please make sure your PC can connect to the Internet
through your broadband service successfully. If there is any problem, please contact
with your ISP for help.
After that, please install the Device according to the following steps. Don
’t forget to
pull out the power plug and keep your hands dry.
1) Power off your PC(s), CableDSL modem, and the Device.
2) Connect the Cable/DSL modem to the Device
’s WAN port.
3) Connect one end of an Ethernet cable to one of the LAN ports on the Device, and
the other end to a network port on a PC, hub, switch or wireless access point.
Repeat this step to connect more PCs or other network devices to the Device.
4) Connect the power cord to the power port of the Device. Then plug the other end
of the power cord to a grounded AC power outlet.
5) Power on your network devices, PCs, Switches, Hubs, and so on.
