}
Appendix A FAQ
Question 1: How to configure TCP/IP?
There are two methods of configuring TCP/IP properties: one is to manually configure
TCP/IP properties; the other is automatically configuring TCP/IP properties with DHCP.
The following describes the configuration procedure of these two methods respectively.
Method I: Manually Configuring TCP/IP
To configure the TCP/IP protocol manually, do the following:
Step 1
On the Windows taskbar, click
Start > Control Panel > Network and
Connection > Local Area Connection
, right click
Local Area Connection
,
and choose
Properties
.
Step 2
In the
Properties
dialogue, double click
Internet Protocol Version 4
(TCP/IPv4)
.
Step 3
In the
Internet Protocol Version 4 (TCP/IPv4)
dialogue, select the
Use the
following IP address
radio button, Enter 192.168.1.x (x is between 2 and
254, including 2 and 254) in the
IP Address
box, enter 255.255.255.0 in the
Subnet Mask
box, and Enter
the IP address of the Device’s LAN interface
(default value is 192.168.1.1) in the
Default gateway
textbox.
Step 4
Select the
Use the following DNS server addresses
radio button, Enter the
IP address of DNS server into the
Preferred DNS server
textbox.
