}
Mandatory PPPoE Authentication:
Select the
Enable
checkbox to let the users
access internet only after pass PPPoE authentication.
Exception Group:
Select the user group who do not need to pass PPPoE
authentication also can access internet. You can configure the user group on
User Management
>
User Group
page.
Start IP Address:
Specify the starting IP address that is assigned by the PPPoE
server.
Primary DNS Server:
Specify the IP address of the primary DNS server that is
available to a PPPoE client.
Secondary DNS Server:
Specify the IP address of the secondary DNS server
that is available to a PPPoE client.
Allow Users to Change Password:
Select to allow the PPPoE client to change
the password themselves.
PPP Authentication:
Specify the PPP authentication mode by which the PPPoE
server authenticates a PPPoE client. The available options are
PAP
,
CHAP
and
Auto
. In most cases, please leave the default value of
Auto
, which means that
the Device will automatically choose
PAP
or
CHAP
to authenticate the PPPoE
client.
Max. Sessions:
Specify the maximum number of PPPoE sessions that can be
created on the Device. The maximum value of
Max. Sessions
depends on the
specific product model.
Note:
The steps of PPPoE client changing password is as following:
1) Open the client and dialing with user name and password.
2) After dialing success, please login to page: http://192.168.1.1/poeUsers.asp (Note
the IP address is LAN
’s IP).
3) Enter the user name, old password, new password, confirmed password and click
the
Save
button to save the changing.
4) Client could change password 5 times every day.
5) Administrator could configure daily routine notification on the
APP Control
>
Notification
page to inform users to change password.
