}
4.4.5 Example of DHCP
1) Requirements
In this case, the DHCP function must be enabled on the Device, with the start IP
Address as 192.168.1.10, and a total of 50 addresses can be assigned; here, the host
with the MAC address of 00:21:85:9B:45:46 assigns the fixed IP address of
192.168.1.15, and the host with the MAC address of 00:1F:3C:0F:07:F4 assigns the
fixed IP address of 192.168.1.10.
2) Configuration Steps
Step 1
Go
to
Network > DHCP Server > DHCP Server Settings
page.
Step 2
Select
Enable DHCP Server
, enter
192.168.1.10
and
192.168.1.59
in the
Start IP Address
and
End IP Address
textbox, configure other parameters
as required, and click the
Save
button after the end of configuration.
Figure 4-19 DHCP Server Settings_Example
Step 3
Go to
Network > DHCP Server > Static DHCP
page and click the
Add
button.
Step 4
Configure the two static DHCP instances in the request, as shown the
following two figures.
Figure 4-20 Static DHCP Settings_Example A
