}
User Name:
Specify a unique user name of the PPTP client. It should be
between 1 and 31 characters long. The PPTP server will use the
User Name
and
Password
to identify the remote PPTP client.
Password:
Specify the password of the PPTP client.
Static IP Address:
Specify the IP address the PPTP server assigns to PPTP
client. Note this IP Address you set should be inside the VPN address pool.
Remote Subnet IP Address:
Specify the subnet IP address of the remote
network. In most cases, you may enter the IP address of the remote VPN
appliance’s LAN interface. If you choose
Mobile User
as the
Tunnel Type
, the
system will automatically generate the
Remote Subnet IP Address
and
Remote
Subnet Mask
.
Remote Subnet Mask:
Specify the subnet mask of the remote network.
10.2.1.5 Client Settings
On the
VPN
>
PPTP
page, click the
Add Client
button to setup PPTP client.
Figure 10-5 PPTP Client Settings
Enable:
Select to enable PPTP client.
Enable NAT:
If selected, it will only allow unidirectional access from the PPTP
client side LAN to the server side LAN.
