}
server address automatically
radio button.
Figure Appendix- 2 Automatically Configuring TCP/IP with DHCP
Step 4
Click
OK
in the
Internet Protocol Version 4 (TCP/IPv4)
dialogue, this will
return you to the
Local Area Connection
Properties
dialogue. Click
OK
again. Till now you have finished configuring the TCP/IP properties.
Question 2: How to reset the Device to factory default settings?
Case I: Know the administrator password
Under normal circumstances, you can directly go to the
System
>
Configuration
page, click
Reset
button, and restart the Device after the reset operation is complete.
Case II: Forget the administrator password
If you forget the administrator password, you can use a pin to press and hold the
Reset
button for more than 5 seconds when the device is on, and then release the
button. After that, the Device will restart with factory default settings.