}
9.3.1 Domain Filtering Settings
Figure 9-13 Domain Filtering Settings
Enable Domain Filtering:
Select to enable this
domain filtering entries
Filtering Mode:
Specify the mode of domain filtering. There are two available
options:
Only Block Domain Names in Domain Name List:
If selected, the Device
will block the LAN users from accessing the domain names in the
Domain
Name list
, but allow the users to access any other domain names.
Only Allow Domain Names in Domain Name List:
If selected, the Device
will allow the LAN users to access the domain names in the
Domain Name
list
, but block the users from accessing any other domain names.
Network Object:
Specify the IP addresses of the packets to which the domain
filtering rule applies. There are two options:
IP Range:
Specify the start and the end addresses.
User Group:
Select it to choose an address group.
Schedule:
Specify the time to which the domain filtering rule applies. You can set
the schedule list on the
APP Control > Schedule
page.
