}
Enable HTTP:
Select this check box to allow HTTP remote management. When
accessing the Device from Internet, you will enter
http://
and enter the Device's
WAN IP address, followed by a colon (:) and the port number. For example, if
WAN IP address is 218.21.31.3 and the port number is 8081, enter in your
browser:
http://218.21.31.3:8081
.
Management Port:
Enter the port number for HTTP remote management. The
default value is 8081.
Note:
To ensure security, it is strongly recommended that you
don’t enable remote
management functions unless necessary. If you are sure to enable them, you had
better change the default password.
11.7 Scheduled Task
This section describes
System
>
Scheduled Task
page. By configuring scheduled
tasks, administrators can predefine the actions completed by the device at a specified
time. The following figure displays the scheduled task you have set.
Figure 11-7 Scheduled Task List
You can click the Task Name hyperlink or the Edit hyperlink to change the content of
task. Clicking
System
>
Scheduled Task
>
Scheduled Task Settings
, you can add a
new scheduled task.
