147
Problem
Possible Cause
Colors do not match the original.
111
118
112
63
46
39
60
—
• The monitor profile chosen in the Color Management tab of the Preferences
dialog does not match your monitor.
• The CMYK profile chosen in the Color Management tab of the Preferences
dialog does not match your printer.
• The RGB color-space profile chosen in the Color Management tab of the
Preferences dialog has too narrow a gamut (colors too vivid) or too wide a
gamut (image lacks contrast).
• Curves, color balance, or LCH settings are incorrectly adjusted.
• The resolution setting in the Crop palette does not suit the output device.
• You scanned negative media without performing an autoexposure operation.
• The Prescan Mode setting in the Scanner Extras palette (LS-2000/
COOLSCAN III only) requires adjustment.
• Monitor settings require adjustment.
The scanned image is too dark.
111
118
112
121
—
• The monitor profile chosen in the Color Management tab of the Preferences
dialog does not match your monitor.
• The CMYK profile chosen in the Color Management tab of the Preferences
dialog does not match your printer.
• The RGB color-space profile chosen in the Color Management tab of the
Preferences dialog has the wrong gamma value for your platform.
• You need to adjust the gamma value chosen in the Gamma tab of the Prefer-
ences dialog for use when Nikon CMS is off.
• The brightness setting on your monitor requires adjustment.
The scanned image has a rough,
jagged appearance.
• The resolution setting in the Crop palette does not suit the output device.
The scanned image has a rough,
jagged appearance.
46
85
• The resolution setting in the Crop palette does not suit the output device.
• The halo width or intensity settings in the Unsharp Mask palette are too high.
The file size is too large.
47
• The value for resolution in the Crop palette is too high.
Appendix B: Troubleshooting