Nikon 9235 - Coolscan III Page 116 Reference Manual Download

Page: 116 / 153

115

Reference: Preferences

Notes on RGB Profiles Provided with Nikon Scan

Apple RGB

(gamma 1.8)

This profile is used in desk-top publishing applications and in

Adobe Photoshop versions 4.0 or earlier, and is the typical RGB

profile for Macintosh monitors. The corresponding RGB set-

ting in Photoshop 5.0 is “Apple RGB.” This profile is suitable for

working with images displayed on the Macintosh.

ColorMatch RGB

(gamma 1.8)

The ColorMatch profile is native to Radius PressView monitors.

It has a wider gamut than Apple RGB, with a particularly wide

area devoted to the reproduction of blues. The corresponding

RGB setting in Photoshop 5.0 is “Color Match RGB.”

Apple RGB (compensated)

(gamma 1.8)

This profile defines tristimulus (red, green, and blue) chromatic-

ity as the intersection of the curve that marks the limits of the

visible gamut with lines drawn from the Apple RGB white point

and passing through the points that define tristimulus chroma-

ticity in the Apple RGB color-space profile. This profile is unique

in that it preserves the characteristics of Apple RGB while al-

lowing more saturated colors. It is not provided in the standard

install of Photoshop 5.0, but can be selected as the RGB color-

space profile for Photoshop by importing the profile

“NKApple_CPS.icm”.

Summary of Contents for 9235 - Coolscan III


























































































































































Search results

Summary of Contents for 9235 - Coolscan III

Reviews:

Related manuals for 9235 - Coolscan III

Brands by name

Popular brands

Nikon 9235 - Coolscan III, Reference Manual

Search results

Summary of Contents for 9235 - Coolscan III

Reviews:

Related manuals for 9235 - Coolscan III

Brands by name

Popular brands