17
Using the control card display and dashboard.
The Drive 300 is equipped with an LED display and interac ve keys for simplifi ed programming and diagnos cs. All setup of the various features requires
that the control card dashboard be used. Below are the func ons of each key on the dashboard.
Enter programming, advance to next
level of op on on display or save value
on display.
Exit menu levels without saving.
Navigate backward in menus, decrease
values or indicate le hand closing gate
in run me setup func on.
Navigate forward in menus, increase
values or indicate righthand closing
gate in run me setup func on. Test
BT mode se ng from “ready” status.
Before con nuing with the commisioning.
If you are unfamiliar with the func onality of this product’s modes, it is suggested that you
familiarise yourself with the basic and advanced opera ng features detailed from page 32
of this instruc on manual.
