25
Receiver programming and setup.
Erasing a single user from the memory.
adr
From Ready status
rdy
The gate can be in any posi on when performing this rou ne.
Ac on
Response
Descrip on
Display
Buzzer
Gate
To enter the program
menu. Press and hold the
bu on un l buzzer
beeps.
Display and buzzer confi rms.
pr9
Scroll < or > to select the
receiver setup op on.
Display scrolls through
op ons.
rc
With “rc” on the display,
press and release
.
Display shows current
op on status.
Lrn
Scroll < or > to select the
Erase remotes op on.
Display scrolls through
op ons.
era
With “ErA” on the display,
press and release
.
Display shows fi rst erase
op on.
adr
With “Adr” on the display,
press and release
.
First user address displays.
001
Scroll < or > to the user
address that you would like
to erase.
Display scrolls through user
addresses.
003
With the correct user
address displayed, press
and hold
.
Display begins fl ashing the
user address selected.
003
While s ll holding
press
the > bu on.
Display confi rms the user
address erase is done.
dne
A er the display confi rms
the erasing of the address
is done release the bu ons.
dne
Display reverts back to the
user address erased.
001
Repeat the last 4 steps here to erase addi onal users or exit back one level in the receiver setup menu for other receiver setup op ons.
Scroll le or right to next
program op on.
OR
rdy
EXIT back to standby
status
