11
Moun ng the operator onto the baseplate.
Removing the cover:
The cover is secured in place by means of four screws. One of which is secured beneath the manual override lever.
Using a Philips ® screwdriver remove the
four cover screws.
Unlock and li the manual override.
Li the main cover to remove it.
Moun ng the gearbox:
(You will need a 13mm socket or spanner)
The gearbox is fastened onto the baseplate by means of the 2 x 25mm x M8 machine bolts and custom moun ng plates. The gearbox distance from
the gate can be adjusted backwards and forwards by up to 30mm. Remember to ensure that there is enough space allowed between the fascia of the
pinion and the proudest part of the gate that passes the pinion. This is to prevent any part of the gate snagging on the pinion as the gate runs.
At this stage of the installa on it is recomended that you place 2 x 2mm thick fl at bars in between the baseplate and motor to facilitate the correct
rack height later. See page 12 and 13 overleaf.
Diagram
number
Descrip on
1
M8 Machine bolt.
2
M8 Flat washer.
3
Moun ng plate.
