27
Receiver programming and setup.
Using the diagnos cs feature.
dia
From Ready status
rdy
The gates can be in any posi on when performing this rou ne.
Ac on
Response
Descrip on
Display
Buzzer
Gate
To enter the program
menu. Press and hold
un l buzzer beeps.
Display and buzzer
confi rms.
pr9
Not appicable.
Use the < or >
bu ons and
scroll un l “rc” displays
rc
Not appicable.
With “rc” on the display,
press and release
.
Display changes to
“Lrn” and buzzer
beeps once
lrn
Not appicable.
Use the < or >
bu ons to
select “diA”
Display changes with
each bu on press.
dia
Not appicable.
With “diA” on the display,
press and release
.
Display changes to
the signal strength
indicator and buzzer
beeps once
i
Not appicable.
In the case of any transmi er on the same
frequency as the receiver, being ac ve in the
area, the signal strength guide will display
how strong the incoming interfering signal is.
Weak signal
i
Not appicable.
Low signal.
ii
Not appicable.
Low/medium signal
iii
Not appicable.
Medium signal
iiii
Not appicable.
Medium/strong signal
iiiii
Not appicable.
Strong signal
iiiiii
Not appicable.
Press and release a
remote transmi er bu on
already learnt into the
receiver memory.
Buzzer beeps once
and user address
display momentarily.
008
Not appicable.
Followed by the
channel that bu on is
learnt into.
bt
Not appicable.
Followed by the
signal strength of the
transmission.
iiiiii
Not appicable.
When done tes ng
remotes, press and
release X to return
to the main receiver
programming menu.
Display changes to
“diA” and buzzer
beeps once
dia
Not appicable.
Scroll < or > to next
program op on.
OR
EXIT back to
Ready status
rdy
