23
Receiver programming and setup.
Se ng up a new user.
lrn
From Ready status
rdy
The gate can be in any posi on when performing this rou ne.
Please note that if an ET BLU MIX © transmi er is being used and
not all of the bu ons have been set to the same format, then the
receiver will allocate 2 user addresses for the various bu ons. 1 for
the bu ons set to ET BLU MIX© and 1 for the bu ons set to ET BLUE.
Ac on
Response
Descrip on
Display
Buzzer
Gate
To enter the program
menu. Press and hold the
bu on un l buzzer
beeps.
Display and buzzer
confi rms.
pr9
Scroll < or > to select the
receiver setup op on.
Display scrolls
through op ons.
rc
With “rc” on the display,
press and release
.
Display shows current
op on status.
lrn
With “Lrn” on the display,
press and release
.
Display prompts you
to select a func on.
bt
Scroll < or > to the required
receiver func on/channel
op on.
NB! Corresponding 4
func on learn op on
is explained in the next
instruc on table on the
next page.
Display changes
respec vely.
bt
ped
rly
hol
cor
Press and hold required
bu on on the remote
transmi er.
While s ll transmi ng with
the remote bu on, press
and release
.
A er the
bu on
has been released,
the user address
for that transmi er
displays and the
buzzer beeps
confi rms.
001
Release the bu on on the
remote transmi er.
Repeat the last 4 steps here for addi onal users or func ons, or exit back one level in the receiver setup menu for other receiver setup op ons.
Scroll le or right to next
program op on.
OR
rdy
EXIT back to standby
status
